歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-新聞資訊噴淋清洗機的清洗液應該怎樣更換

新聞資訊

噴淋清洗機的清洗液應該怎樣更換

作者：創始人來源：http://www.400qy.cn/時間：2025-02-15

　　噴淋清洗機的清洗液更換步驟通常包括以下幾個環節：

　　The steps for replacing the cleaning solution of a spray cleaning machine usually include the following steps:

　　一、準備工作

　　1、 Preparation work

　　確保安全：在更換清洗液之前，首先要確保噴淋清洗機已經關閉，并且切斷了電源，以防止意外啟動或觸電。

　　Ensure safety: Before replacing the cleaning solution, first make sure that the spray cleaning machine is turned off and the power is cut off to prevent accidental start-up or electric shock.

　　準備工具與材料：準備好新的清洗液、容器（用于收集舊清洗液）、清潔布、手套等必要工具和材料。

　　Prepare tools and materials: Prepare new cleaning solution, containers (for collecting old cleaning solution), cleaning cloths, gloves, and other necessary tools and materials.

　　二、排放舊清洗液

　　2、 Discharge old cleaning solution

　　找到排放口：根據噴淋清洗機的型號和設計，找到清洗液箱的排放口。排放口通常位于清洗液箱的底部或側面。

　　Find the discharge port: Based on the model and design of the spray cleaning machine, find the discharge port of the cleaning solution tank. The discharge outlet is usually located at the bottom or side of the cleaning solution tank.

　　排放舊清洗液：將容器放置在排放口下方，打開排放閥或旋開排放塞，將舊清洗液排放到容器中。注意避免清洗液濺到身上或地面上。

　　Discharge old cleaning solution: Place the container under the discharge port, open the discharge valve or unscrew the discharge plug, and discharge the old cleaning solution into the container. Be careful to avoid splashing cleaning solution onto the body or the ground.

　　三、清洗清洗液箱

　　3、 Cleaning solution tank

　　檢查清洗液箱：在排放完舊清洗液后，檢查清洗液箱內部是否有殘留物或污垢。

　　Check the cleaning solution tank: After draining the old cleaning solution, check whether there is any residue or dirt inside the cleaning solution tank.

　　清洗清洗液箱：使用清潔布和適量的清水或專用清潔劑清洗清洗液箱內部，確保清洗干凈無殘留。

　　Cleaning solution tank: Use a cleaning cloth and an appropriate amount of water or specialized cleaning agent to clean the inside of the cleaning solution tank, ensuring that it is clean and free of residue.

　　四、加入新清洗液

　　4、 Add new cleaning solution

　　準備新清洗液：打開新清洗液的容器，確保清洗液的質量符合要求。

　　Prepare new cleaning solution: Open the container of the new cleaning solution and ensure that the quality of the cleaning solution meets the requirements.

　　加入新清洗液：將新清洗液緩慢倒入清洗液箱中，注意避免濺出。根據噴淋清洗機的說明書或標識，確定清洗液的正確加入量和濃度。

　　Add new cleaning solution: Slowly pour the new cleaning solution into the cleaning solution tank, taking care to avoid splashing out. Determine the correct amount and concentration of cleaning solution according to the instructions or labeling of the spray cleaning machine.

　　五、檢查與調試

　　5、 Inspection and debugging

　　檢查液位：加入新清洗液后，檢查清洗液箱的液位是否在規定范圍內。如果液位過低，應及時補充。

　　Check the liquid level: After adding new cleaning solution, check if the liquid level in the cleaning solution tank is within the specified range. If the liquid level is too low, it should be replenished in a timely manner.

　　啟動噴淋清洗機：在確認清洗液已經正確加入后，重新啟動噴淋清洗機，進行簡單的調試和檢查，確保設備正常運行且清洗效果良好。

　　Start the spray cleaning machine: After confirming that the cleaning solution has been correctly added, restart the spray cleaning machine for simple debugging and inspection to ensure that the equipment is running normally and the cleaning effect is good.

　　六、注意事項

　　6、 Precautions

　　安全防護：在更換清洗液時，應佩戴手套、口罩等個人防護裝備，防止清洗液對皮膚或呼吸道造成刺激。

　　Safety protection: When changing the cleaning solution, personal protective equipment such as gloves and masks should be worn to prevent the cleaning solution from irritating the skin or respiratory tract.

　　清洗液選擇：選擇適合噴淋清洗機的清洗液，避免使用不兼容或質量不合格的清洗液。

　　Cleaning solution selection: Choose a cleaning solution suitable for the spray cleaning machine to avoid using incompatible or substandard cleaning solutions.

　　定期更換：根據噴淋清洗機的使用頻率和清洗效果，定期更換清洗液，以保持設備的最佳運行狀態。

　　Regular replacement: Based on the frequency of use and cleaning effect of the spray cleaning machine, regularly replace the cleaning solution to maintain the optimal operating condition of the equipment.

　　通過以上步驟，可以確保噴淋清洗機的清洗液得到正確、安全的更換，從而延長設備的使用壽命并提高清洗效果。

　　Through the above steps, it can be ensured that the cleaning solution of the spray cleaning machine is replaced correctly and safely, thereby extending the service life of the equipment and improving the cleaning effect.

　　本文由噴淋清洗機友情奉獻.更多有關的知識請點擊 http://www.400qy.cn 真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the spray cleaning machine For more related knowledge, please click http://www.400qy.cn Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.

上一篇：超聲波水槽大小決定了清洗范圍
下一篇：低溫廢水回收設備的使用原理