噴淋清洗機在進行使用時主要是利用傳動鏈條帶動工件輸送，在一定程度上主要應用在噴淋工藝清除工件上的附屬物然后對其進行烘干；待清洗的工件放于輸送鏈網上，經鏈網送入清洗機腔體，依照程序清洗烘干后，送至卸料臺出料。那你知道噴淋清洗機清洗要根據什么要求來嗎？

The spray cleaning machine is mainly used to drive the workpiece transportation with the transmission chain when it is used. To a certain extent, it is mainly used in the spray process to remove the accessories on the workpiece and then dry it; The workpieces to be cleaned are placed on the conveying chain net and sent to the chamber of the cleaning machine through the chain net. After cleaning and drying according to the procedure, they are sent to the unloading table for discharging. Do you know what the requirements of spray washer cleaning are?

（1）根據要噴淋清洗工件的污垢具體特點

(1) According to the specific characteristics of the dirt on the workpiece to be sprayed and cleaned

在設計一個清洗工藝時，先要對污垢的性質、數量以及在清洗表面附著的情況進行了解。通常的清洗工藝和設備都是針對特定的污垢而設計的，一般是先用經濟的方法將大部分污垢除去，然后用其他的方法對殘留的污垢進行處理，用分步進行的方法組成一個清洗工藝。

When designing a cleaning process, it is necessary to understand the nature, quantity and adhesion of dirt on the cleaning surface. The common cleaning process and equipment are designed for specific dirt. Generally, most dirt is removed by economic methods, and then residual dirt is treated by other methods. A cleaning process is composed of steps.

（2）對噴淋清洗洗凈程度的要求

(2) Requirements for cleaning degree of spray cleaning

在選擇清洗工藝及設備時，須考慮清洗要求達到的噴淋洗凈程度。對不同洗凈程度要求的清洗應選擇不同的清洗工藝和設備。洗凈程度要求越高，清洗成本也越高，而且生產成本是以幾何級數遞增的，但是在某些情況下，為了避免出現因清洗效果不佳而造成損失，選擇成本高的清洗工藝和設備也是有必要的，自然就不會把生產的經濟性放在先要考慮的地方了。

When selecting the cleaning process and equipment, the spray cleaning degree required for cleaning must be considered. Different cleaning processes and equipment shall be selected for cleaning with different cleaning degree requirements. The higher the cleaning degree is required, the higher the cleaning cost is. Moreover, the production cost increases in geometric progression. However, in some cases, in order to avoid losses caused by poor cleaning effect, it is necessary to choose high cost cleaning processes and equipment. Naturally, the economy of production will not be considered first.

總之噴淋清洗機水位清洗節拍快，效果統一，不會對工件造成磨損，設備中每個環節的工作時間、溫度和功率可以按需設置；設備上料采用雙確認按鈕，并配有安全光柵，確保操作人員安全，獨立控制柜，上下料工位處配有懸臂控制面板。等等。您有什么需求可以隨時來我們網站www.400qy.cn咨詢！

In short, the water level cleaning of the spray washer is fast and uniform, and will not cause wear to the workpiece. The working time, temperature and power of each link in the equipment can be set as required; Double confirmation buttons are used for equipment loading, and safety gratings are equipped to ensure the safety of operators. Independent control cabinets are equipped with cantilever control panels at the loading and unloading stations. wait. You can visit our website www.400qy.cn at any time if you have any needs!