歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-新聞資訊超聲波清洗機會損壞工件表面嗎？

新聞資訊

超聲波清洗機會損壞工件表面嗎？

作者：admin來源：http://www.400qy.cn/時間：2021-01-06

沒有用過超聲波清洗機的客戶可能會存在一些疑問，用超聲波清洗機清洗工件會不會對工件造成損傷，答案當然是否定的。山東通海機械做超聲波清洗機、噴淋清洗機的生產廠家告訴大家，超聲波清洗機清洗工件不會對工件造成任何的損傷。

Customers who have not used the ultrasonic cleaning machine may have some questions about whether cleaning the workpiece with the ultrasonic cleaning machine will cause damage to the workpiece. Of course, the answer is No. Shandong Tonghai machinery do ultrasonic cleaning machine, spray cleaning machine manufacturers tell you, ultrasonic cleaning machine will not cause any damage to the workpiece.

分體式超聲波清洗機供應商告訴您：一般來說，影響超聲波清洗效果的有清洗頻率、清洗時間、清洗溫度等幾個因素。超聲波低頻情況液體中產生的氣泡尺寸大，對清洗物件的作用力更強，同時低頻比較容易損傷腐蝕工件表面；超聲波清洗機高頻穿透力強，復雜盲孔都可以清洗到。所以說選擇適合清洗工件所需的頻率是很重要的。

The supplier of split type ultrasonic cleaning machine tells you: Generally speaking, there are several factors influencing the effect of ultrasonic cleaning, such as cleaning frequency, cleaning time, cleaning temperature, etc. In the case of ultrasonic low frequency, the bubble size in the liquid is large, and the force on the cleaning object is stronger. At the same time, the low frequency is easy to damage and corrode the surface of the workpiece; the high frequency penetration of ultrasonic cleaning machine is strong, and complex blind holes can be cleaned. Therefore, it is very important to choose the appropriate frequency for cleaning the workpiece.

工件清洗時間也是影響清洗效果的一大因素，對于較活潑的金屬，清洗完表面污漬之后，應立即拿出，因為超聲波清洗機槽內的溫度，是會隨著清洗時間的長度不斷增加的，如果不及時拿出，很可能會對工件造成損壞。在清洗過程中，肯定對物件產生了一定的損傷。

The cleaning time of the workpiece is also a major factor affecting the cleaning effect. For the more active metal, it should be taken out immediately after cleaning the surface stains, because the temperature in the groove of the ultrasonic cleaning machine will increase with the length of the cleaning time. If it is not taken out in time, it is likely to cause damage to the workpiece. In the process of cleaning, there must be some damage to the object.

當然這是從微觀上分析。通常清洗與物件上沾染，粘合，附著的尚未與物件產生物理反應的物件，那么超聲波清洗對物品造成的損壞是微乎其微的，可以忽略，不過物體本身的性狀不同，使用超聲波清洗機的頻率和功率也須掌握好，只有在相對的條件下，才能做到超聲波的無損清洗。

Of course, this is a microscopic analysis. Usually, if the cleaning is carried out on the objects that are contaminated, bonded and attached, and have no physical reaction with the objects, the damage caused by ultrasonic cleaning to the objects is negligible, but the properties of the objects are different, so the frequency and power of the ultrasonic cleaning machine must be well controlled. Only under relative conditions, can the ultrasonic non-destructive cleaning be achieved.

上一篇：超聲波清洗機連體和分體各自的優點
下一篇：【電源問題】超聲波清洗機的開關電源問題總結