歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題防爆高壓清洗機在石油行業使用

常見問題

防爆高壓清洗機在石油行業使用

作者：admin來源：http://www.400qy.cn/時間：2023-11-24

將防爆高壓清洗機用于清洗輸油管道。不僅清洗效率高(一根油管清洗時間僅為2分鐘左右)，而且清洗效果也很好。

Use an explosion-proof high-pressure cleaning machine to clean oil pipelines. Not only is the cleaning efficiency high (the cleaning time for one oil pipe is only about 2 minutes), but the cleaning effect is also very good.

一般情況下，防爆高壓清洗機的高壓水射流溫度可達150℃、壓力可達200bar，高溫不僅能快速熔化油脂、蠟和油，而且能快速地沖洗熔體。該清洗方法不僅成本低，而且節能環保。這是一種很好的清洗油管的方法。

In general, the high-pressure water jet temperature of explosion-proof high-pressure cleaning machines can reach 150 ℃ and the pressure can reach 200bar. High temperature not only quickly melts grease, wax, and oil, but also quickly washes the melt. This cleaning method not only has low cost, but also is energy-saving and environmentally friendly. This is a good method for cleaning oil pipes.

防爆柱塞泵來維持高壓清洗機的高壓運行

Explosion-proof plunger pump to maintain high-pressure operation of high-pressure cleaning machine

1、高壓泵每次使用后，用清水沖洗軟管和噴嘴內的殘液，清洗機殼，發現電源線有損壞或壓力不足時，應將電源線存放在固定的地方，并標明“待修”，使用前應及時通知維修人員；負責高壓泵的維修人員，每天檢查一次高壓泵的運行情況，并做好記錄。

1. After each use of the high-pressure pump, rinse the residual liquid in the hose and nozzle with clean water, and clean the casing. If any damage or insufficient pressure is found to the power cord, it should be stored in a fixed place and marked as "to be repaired". Before use, maintenance personnel should be notified in a timely manner; The maintenance personnel responsible for the high-pressure pump shall inspect the operation of the high-pressure pump once a day and keep records.
全自動超聲波清洗機

2、如發現密封損壞，老化引起泄漏，壓力不上升，應及時更換;

2. If the seal is found to be damaged, aging causes leakage, and the pressure does not rise, it should be replaced in a timely manner;

3、每半年檢查高壓泵電機的電氣性能、機械性能、主機和主接觸器開關，并增加必要的潤滑油，確保設備正常使用和記錄；

3. Check the electrical and mechanical performance of the high-pressure pump motor every six months, as well as the switch of the host and main contactor, and add necessary lubricating oil to ensure the normal use and recording of the equipment;

4、定期檢查和正確的安全閥釋放壓力至1.08額定操作壓力的1.1倍;

4. Regularly inspect and correctly release the pressure of the safety valve to 1.1 times the rated operating pressure of 1.08;

5、定期檢查壓力表的精度，定期檢查皮帶的松緊度，更換損壞的易損件，調整零件間隙，檢查并擰緊螺釘；

5. Regularly check the accuracy of the pressure gauge, regularly check the tightness of the belt, replace damaged and vulnerable parts, adjust the gap between parts, and check and tighten screws;

6、高壓泵一般應保持一定的油位，如發現潤滑油不足應保持在油浸面的六至七分之一，并及時加注，保證設備正常運行；

6. High pressure pumps should generally maintain a certain oil level. If insufficient lubricating oil is found, it should be kept at six to one seventh of the oil immersed surface and promptly filled to ensure the normal operation of the equipment;

7、需要長時間關閉的泵，用清水清洗，泵體內的液體排出，所有閥門被拆除，防銹油被應用，整個泵具有防腐和維護功能。

7. The pump that needs to be shut down for a long time should be cleaned with clean water, the liquid inside the pump body should be discharged, all valves should be removed, anti rust oil should be applied, and the entire pump should have anti-corrosion and maintenance functions.

8、如果你想使泵很長一段時間來處理泵的檢查和維修的各個方面，或無法啟動。

8. If you want the pump to handle all aspects of pump inspection and maintenance for a long period of time, or if it cannot be started.

有了高壓去毛刺清洗機上面的小總結，希望對廣大客戶有所幫助，如果有什么不理解的或者尋求幫助的請點擊我們的網站： http://www.400qy.cn或者來電咨詢，我們會盡全力為您解決

With the summary on the high-pressure deburring cleaning machine, we hope it can be helpful to our customers. If you have any questions or need help, please click on our website: http://www.400qy.cn Or call for consultation, and we will do our best to solve it for you

上一篇：高壓水射流清洗機的使用領域介紹
下一篇：旋鈕型落地式超聲波清洗器的結構特點